5 taboos and 4 measures for the hottest stone main

  • Detail

5 taboos and 4 measures for stone maintenance

with the rapid development of social economy and the improvement of living standards, most shopping malls, hotels and other public places or families choose stone as decorative elements. Through industry experts, we know that stone maintenance is not a simple stone cleaning, it is learned. As a high-grade decorative material, the dust, waste gas, acid rain, freezing and other pollutants in the natural environment are very easy to cause fading, pollution and even damage to the stone, which greatly reduces the decorative effect and service life of the stone. Artificial trampling and friction between sand and dust will also make the stone beyond recognition and lose its original luster after a period of time. In order to prolong the service life of the stone and maintain the natural noble quality of the stone, it must be regularly maintained. The following introduces "5 Taboos" and "4 implementation" of stone maintenance

five taboos for stone maintenance

1. Do not wash with water directly: natural stone, like natural wood, is a porous material that can breathe, so it is easy to absorb water or invade pollution through water dissolution. If the stone absorbs too much water and pollution, it will inevitably cause various stone diseases. Such as: macula, water spots, white China, pantothenine and other annoying problems. Therefore, the stone shall not be washed with water or dragged with a wet mop

2. Do not touch non neutral objects: all stones are afraid of acid and alkali. For example, acid often causes the oxidation of pyrite minerals in granite to produce yellowing. Acid will decompose the calcium carbonate contained in marble, causing the surface to be eroded. Alkali is also the primary factor that erodes the crystallization of granite feldspar and quartz silicide and destroys the stone mirror

3. Do not wax at will: there are many kinds of waxes on the market, including water-based wax, stearic acid wax, oily wax, acrylic wax, etc. These waxes basically contain acid-base substances. It will not only block the pores of the stone, but also get stained with dirt to form wax scale, resulting in yellowing on the surface of the stone

4. Do not use non neutral cleaners indiscriminately: in order to achieve rapid cleaning effect, general cleaners contain acid and alkali. Therefore, if the cleaner with unknown ingredients is used for a long time, the gloss of the stone surface will be lost, and the residue of non neutral agents is also the main cause of stone lesions in the future

5. Do not cover carpets and sundries for a long time: to keep the stone breathing smoothly, avoid covering carpets and sundries on the stone surface for a long time. Otherwise, the moisture under the stone cannot be volatilized through the stone pores. The stone will have annoying stone pathological changes due to excessive moisture and increased water content

4 implementation of stone maintenance

1. It should be thoroughly maintained and clean: no matter the granite with hard texture or the marble with soft texture is easy to move, it is not resistant to the long-term ravage of wind sand and soil particles. Therefore, the dust collector and electrostatic mop should be used from time to time to thoroughly remove dust and clean. At the entrance of the commercial space, it is best to place a dust removing pad to filter the sand carried by the shoes. It is best to wear slippers after entering the home to reduce the chance of sand dust wearing the stone surface

2. Regular maintenance and gloss maintenance: dust removal and cleaning alone cannot keep the luster of bright stones. p>

3. Immediately remove the pollution: all natural stones have pores, and the pollution sources (oil, tea, coffee, cola, soy sauce, ink, etc.) will easily penetrate into the stone along the pores, forming annoying stains. Therefore, it is necessary to select high-quality special protective agents for stones on June 22 to prevent the pollution sources from polluting the stones. It is necessary to know that all protective agents cannot prevent pollution 100% for a long time. Therefore, once there is a pollution source on the stone, it must be removed immediately to prevent it from penetrating into the capillary holes of the stone

4. Always keep ventilated and dry: stones are afraid of too much humidity. Water vapor will cause hydration, hydrolysis and carbonation of stone materials, resulting in various pathological changes such as water spots, whiteness, weathering, rust, etc., which will destroy stone materials. Therefore, the stone installation site should always be ventilated and dry

1756 dh rio
1756 l82e

Copyright © 2011 JIN SHI